Installation

• Download from the URL below
  https://osdn.jp/projects/pepolinux/releases/p14620
• Please prepare the flash memory of the following capacity

# fdisk /dev/mmcblk0

Welcome to fdisk (util-linux 2.29.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Command (m for help): p
Disk /dev/mmcblk0: 7.3 GiB, 7820279808 bytes, 15273984 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x15ae16d5

• Extract the downloaded IOT-House_zero_w_xx.7z and write IOT-House_zero_w_xx.img to the flash memory
• Extract the downloaded IOT-House_zero_w_xx.7z and write IOT-House_zero_w_xx.img to the flash memory
• Turn on the Raspberry Pi, wait at least 3 minutes for the ACT LED to subside and then turn it off.
• Take out the flash memory and edit the following /boot/iothouse_config.txt by following the example with a text editor.
• In a Wifi environment with MAC Address filtering, register the following displayed addresses and enable filtering.

※ # Wireless address of this machine –> b8:27:eb:XX:XX:XX

• If you use a device that can be recognized by USB connection eth0, comment out the SSID and KEY.

  # Please describe the setting for IOTHouse below
  # Wireless address of this machine -->  b8:27:eb:XX:XX:XX
  # The following is an example of a static ip address
  #HOST_NAME=iot000
  #SSID=iothouse999
  #KEY=999iothouse
  #IP_ADDRESS=192.168.1.200/24
  #GATE_WAY=192.168.1.1
  #NAME_SERVER=8.8.8.8
  # end of an example
  
  # The following is an example of dynamic ip address
  # Access is iot000.local
  #HOST_NAME=iot000
  #SSID=iothouse999
  #KEY=999iothouse
  #IP_ADDRESS=dhcp
  # end of an example
  
  HOST_NAME=
  SSID=
  KEY=
  IP_ADDRESS=
  GATE_WAY=
  NAME_SERVER=

• Insert the flash memory after editing /boot/iothouse_config.txt and turn on the Raspberry Pi again.
• Access http://HOST_NAME.local with a web browser and log in with username: remote password: hand
• ssh is username: root password: pepolinux