Smell sensor

What is pepoiaq2led

• Gas resistance value read from environmental gas sensor BME680 50 counts every 5 minutes Average value 80%, temperature 10%, humidity 10% Air quality calculated from: IAQ (indoor air quality) 0 to 500 The browser is good (with numerical values) It is expressed in green)~ very_bad (red) colors.

• You can turn on the 3-color LED from the GPIO output with pepoiaq2led.
• If it is always running, it can be used as an odor sensor appliance.
• pepoiaq2led is started via daemontools with the following command.

  # cd /www/pepolinux
  # ln -s /usr/local/bin/pepoiaq2led iaqled
  # cd /service/
  # ln -s /www/pepolinux/iaqled iaqled

• pepoiaq2led started by daemontools is stopped/started/confirmed by the following command.

  # svc -d /www/pepolinux/iaqled
  # svc -u /www/pepolinux/iaqled
  # svstat /www/pepolinux/iaqled

• Raspberry pi’s BME680 and 3-color LED detect the smell of garlic in a tube Demo video

• Please check the source code below
  https://github.com/kujiranodanna/IOT-House/blob/master/raspberrypi/usr/local/bin/pepoiaq2led