pepogpioctld

What is pepogpioctld

• It is a daemon that quantifies the air quality based on the input / output control of gpio and the data of the environmental gas sensor BME680.

• When the BME680 sensor is connected, the gas resistance value is 50 counts every 5 minutes from the 2021/02/04/17:22: 23,10.2,43.0,1018.9,3436 value created by pepobme680. Based on the average value of 80%, temperature of 10%, and humidity of 10%, the following air quality: IAQ (indoor air quality) is calculated and added.

• IAQ is Sample 0(Good) to 500(Hazardous) Temperature(17-28℃):10% Humidity(40-70%):10% Gas(Gas±Gas_base/Gas_base):80%

  [iot00f:root#] cat /www/remote-hand/tmp/.pepobme680
  2021/02/04/17:22:23,10.2,43.0,1018.9,3436
  Date/time, temperature, humidity, pressure, gas resistance
  
  [iot00f:root#] cat /www/remote-hand/tmp/.gpiodi_read_data
  di[0]=1
  di[1]=1
  di[2]=1
  di[3]=0
  gpio_i2c=17:25:15,10.2,43.0,1019,3436,21
  Date/time, temperature, humidity, pressure, gas resistance, air quality
  [iot00f:root#] cat /www/remote-hand/tmp/.gpiodo_write_data
  do[0]=0
  do[1]=0
  do[2]=0
  do[3]=0

  

• Please check the source code below
  https://github.com/kujiranodanna/IOT-House/blob/master/raspberrypi/usr/local/bin/pepogpioctld